Our craftsman’s re-work of Mizuno’s prolific T-Series wedge, with subtle top-line refinements visible from the playing position.
Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with higher spinning QUADCUT+ grooves and five unique sole profiles.
“THE NEW QUADCUT+ GROOVES CAME FROM THE REALISATION THAT AN ADJUSTMENT TO THE CAMBER OF THE GROOVE SHOULDER AND THE TAPER OF THE GROOVE PROFILE WOULD CREATE AN OPPORTUNITY TO MOVE OUR GROOVES CLOSER TOGETHER – RESULTING IN MORE SPIN.”
DAVID LLEWELLYN – DIRECTOR OF R&D
T24 WEDGE SOLE PROFILES
V-PROFILE
High bounce with aggressive relief for versatility and steeper attack angle.
X-PROFILE
Low bounce with aggressive relief for versatility and shallow attack angle.
S-PROFILE
High bounce with limited relief. For full shots.
D-PROFILE
Mid bounce with moderate relief for gentle manipulation.
C-PROFILE
Mid / high bounce with generous relief for across a wide range of players / conditions.
V-PROFILE
High bounce with aggressive relief for versatility and steeper attack angle.
X-PROFILE
Low bounce with aggressive relief for versatility and shallow attack angle.
S-PROFILE
High bounce with limited relief. For full shots.
D-PROFILE
Mid bounce with moderate relief for gentle manipulation.
“THE NEW V SOLE PROFILE WAS THE RESULT OF SCANNING OUR TOUR PLAYER’S PERSONAL GRINDS AND SEEING THE AMOUNT NOW PLAYING A HIGHER BOUNCE WEDGE WITH VERY AGGRESSIVE TRAILING EDGE, HEEL AND TOE RELIEF.”
CHRIS VOSHALL – DIRECTOR OF PRODUCT
FORGED IN HIROSHIMA JAPAN
One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.
QUADCUT+ GROOVES
An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.
CRAFTSMAN REFINED TOPLINE
Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.
WET WEATHER PERFORMANCE
Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.
WRAP-AROUND SOLE RELIEF
Increased sole relief to heel and toe across all 5 grind options.
LOFT SPECIFIC PROFILE
Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).
SPIN-WEIGHTED BLADE DESIGN
A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.
Soft White Satin (with copper underlay) Finish for Lefties
TECHNICAL DETAILS
Grain Flow Forged HD: One-piece Grain Flow Forged HD from 1025E Pure Select mile carbon steel at Mizuno's iconic facility in Hiroshima, Japan. Where Mizuno irons have been produced since 1968.
1025 Boron : A carbon steel that featurs 30% greater strength.
Refined Topline: Mass taken from the toe portion and a lower hosel blend creates a smaller profile without loss of effective hitting area.
Quad Cut + Grooves: An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.
Wrap-Around Sole Relief: Increased sole relief from heel to toe across all 5 grind options.
Spin-weighted Blade Design: A flared upper portion of the blade creates higher spin and penetrating trajectory, particularly from strikes high on the club face.
Hydroflow Micro Grooves: Laser etched microscopic grooves help channel away moisture for maximum spin in wet conditions
Face Milling Lines : Increased surface roughness to increase spin nearer the green.
Loft/COG Flow Design : The COG of these wedges flows throughout the set to give more control and versatility.
Bounce Specific Sole Grinds: Matched bounce and sole grind for an ideal level of versatility.S-Type: high bounce with limited relief for full shots.D-Type: mid bounce with moderate relief for gentle manipulation.C-Type: mid/high bounce with generous relief for a wide range of players and conditions.V-Type: high bounce with aggressive relief for versatility on square and open faced shots.X-Type: low bounce with aggressive relief for advanced players for the most versatility.
Loft Specific Head Shapes : Graduated head shapes from pitching wedge to lob wedge ideally suited for how each wedge is used.
Copper Underlay: Thin copper layer beneath a nickel chrome to provide a further enhanced impact feel
Harmonic Impact Technology: Fine tuned head geometry delivers ideal impact feel and feedback
SPESIFICATIONS
T24 GAP WEDGES SPECIFICATIONS
Club #
Loft °
Lie Angle
USGA/R&A Length *
Bounce
Profile
50/08
50
63
35.5″
8
S
52/10
52
63
35.5″
10
S
T24 SAND WEDGES SPECIFICATIONS
Club #
Loft °
Lie Angle
USGA/R&A Length *
Bounce
Profile
54/08
54
63
35.5″
8
D
54/10
54
63
35.5″
10
S
56/06
56
63
35.5″
6
C
56/08
56
63
35.5″
8
V
56/10
56
63
35.5″
10
D
56/12
56
63
35.5″
12
S
T24 LOB WEDGES SPECIFICATIONS
Club #
Loft °
Lie Angle
USGA/R&A Length *
Bounce
Profile
58/04
58
63
35.5″
4
X
58/08
58
63
35.5″
8
C
58/10
58
63
35.5″
10
V
58/12
58
63
35.5″
12
D
60/06
60
63
35.5″
6
X
60/10
60
63
35.5″
10
C
60/12
60
63
35.5″
12
V
* Mizuno has recently changed its official measurement method to match the USGA / R&A standard. As a consequence our published club lengths are now 1/4 inch longer (when actual club length is unchanged).
Looking for this in +1 inch or -.5 inch? Interested in one of these for a Women or even Women’s Petite?
Email us at LeftiesOnly@Comcast.net or Call us for one of our Custom Builds 1-800-533-8437 (Inside United State) 1-802-862-1114 (Outside the United States)
No additional costs will apply using stock shafts and grips and all manufacturer warrantees will apply.
